Whether it concerns solid or flux-cored welding wires, Tig rods or sub arc wires and powders and or brazing alloys or even thermal spray wires, you have come to the right place. With no less than 2,000 tons of stock and more than 500 different alloys, we are ready to serve you.
In our Product Database you can find all our products by searching on Category, product name, Equivalent, EN, AWS, W.Nr or material to be welded.
Equivalent search is the fastest way to find your CEWELD equivalent of most common brands.
CEWELD® ER 80S-B3L Tig is a low alloy copper-coated TIG rod with 2.25% Cr and 1% Mo content, with low carbon content (less than 0.05%), to be used for welding creep resistant steels.
This Type is identical to ER80S-B2, with the exception of the reduced carbon content.
This results in lower hardness and strength values, which reduces the tendency to crack, especially if the weld seams are not heat-treated.These steels are usually used for operating temperatures of up to
550°C. Typical applications are in power plant construction, pressure pipe, turbine and boiler construction. The alloy is also used alloy is also used in the chemical and petrochemical industry.
Filler metal specifically intended for high integrity structural service at elevated temperature so the minor alloy additions responsible for its creep strenghth are kept above the minimum considered necessary to ensure satifactory performance.
T92/P92 steel is commonly used at service temperatures up to 620°C. V, Nb and N additions provide this ‘creep strength enhanced ferritic’ (CSEF) alloy with improved high temperature creep resistance compared to standard CrMo creep resistant alloys.
Due to the addition of 0,5% copper and 0,8% Ni this alloy offers excellent weather resistant properties
Solid filler metal with excellent flowing properties under pure Argon suitable for high strength fine grain steels in combination with excellent impact toughness at sub zero temperatures.
Corrosion resistance is equivalent to type 304, high mechanical properties and good weldability, work hardening and cold-tough to -110°C.
CEWELD® 308L Tig has good general corrosion resistance. The alloy has a low carbon content, making it particularly recommended where there is a risk of intergranular corrosion.
Austenitic filler metal for stabilized and non-stabilized CrNi steels. Heat resistant up to 350°C. Excelent toughness properties down to -196°C. Good resistance to nitric acid.
CEWELD 308H Tig has been developed for typical operating temperatures up to 400ºC, and up to 600ºC in the short-term range. It also shows good resistance to general corrosion.
CEWELD 308H Tig shows higher temperature and scale resistance than the standard L-type. The microstructure is austenite with approx. 5-10% ferrite.