… Cr and Mo-alloyed basic elektrode for welding creep resistant steels and steel casting for working temperatures up to 600°C. The weld metal is resistant to high hydrogen pressure. … 12crmo19.5, GS-12crmo19.5, 1.7362, 1.7363     … E CrMo5 … A …

… High basic offshore electrode according the latest offshore requirements for sub zero temperatures down to -60°C.  Suitable for steel types up to 550 MPa yield strength, excellent … treatments as applied in Riser applications. … Reh ≤ 550 MPa, ISo 15608: 1.3, 2.1, ~3.1 S460N, S460M, S460NL, S460ML, S460Q-S555Q, …

… Hardfacing alloy for cladding steel mill rollers, thermoshock resistant and suitable for Francis and Pelton turbines. Used in … hardness and is resistant against metal-metal wear and high surface pressure.  … 1.4317, 1.4313, 1.4407, 1.4414,    GX4CrNi13-4, …

… CEWELD E NiFe 2 has a few benefits compare to other “FeNi” types … free from porosity even on old and or otherwise diluted base material. Preheating is normally done to slow down the cooling speed, in case you … EN-GJS-400-15, EN-GJS-400-18, EN-GJS-450-10, EN-GJS-500-7, EN-GJS-600-3, EN-GJS-700-2. GGG40, GGG45, GGG50, GGG60; GGG70, GGG80   … E …

… Mechanical properties listed below reflect utilization of a post-weld … between 1024°C (1875°F) and 1052°C (1925°F) for one hour, followed by precipitation hardening between 623°C (1135°F) … Suitable for precipitation hardening stainless steel used for welding materials of …

… This Type is identical to ER80S-B2, with the exception of the reduced carbon content. This results in lower hardness … of up to 550°C. Typical applications are in power plant construction, pressure pipe, turbine and boiler construction. The alloy is also used …

… NiCrMo 686 (UNS N06686/W.Nr. 2.4606) is a single-phase, austenitic … to enhance properties. Low carbon (C) helps minimize grain boundary precipitation to maintain corrosion-resistance in the heat-affected … and super-austenitic stainless steels, nickel alloys such as UNS N06059 and N06022, INCONEL alloy C-276, and INCONEL alloys 622, C22, 625, …

… Outstanding alloy against high impact combined with abrasion including metal to metal friction. The weld … appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … Rebuilding worn machine parts, Rails, …

… Very good abrasion resistance in combination with impact even at higher temperatures up to 550ºC. To much layers should be avoided, preheat is necessary to avoid cracking. A buffer layer with AA M690 or …

… He is a copper coated, Ni-alloyed (2,4% Ni), solid wire for low temperature … of 470 Mpa. The wire provides excelent impact thoughness down to -60°C. … For cryogenic construction steels and Ni bearing low temperature steels. 11MnNi5-3, 13MnNi6-3, 15NiMn6, S275NL-S460NL, S275ML-S460ML, P275NL2-P460NL2, P355ML2-P460ML2 ASTM: A203 grade …