<
  • PRODUCT SPECIFICATIONS
  • PACKAGING
Type
Nickel-Chromium-Molybdenum based alloy for Tig welding
classification
AWS
A 5.14: ERNiCrMo-14
EN ISO
18274: S Ni 6686 (NiCr21Mo16W4)
W.Nr.
~2.4606
Applications

NICrMo 686 is of great value for service environments requiring general corrosion-resistance in HCI or sulfuric acid; for resistance to crevice corrosion in hot, concentrated acid chloride solutions such as sulfur dioxide saturated NaCl solutions and oxidizing chloride solutions; and for resistance to intergranular attack, and for resistance to intergranular attack, after sensitization, in highly oxidizing environments.

Type
Nickel-Chromium-Molybdenum based alloy for Tig welding
Applications

NICrMo 686 is of great value for service environments requiring general corrosion-resistance in HCI or sulfuric acid; for resistance to crevice corrosion in hot, concentrated acid chloride solutions such as sulfur dioxide saturated NaCl solutions and oxidizing chloride solutions; and for resistance to intergranular attack, and for resistance to intergranular attack, after sensitization, in highly oxidizing environments.

Properties

NiCrMo 686 (UNS N06686/W.Nr. 2.4606) is a single-phase, austenitic Ni-Cr-Mo-W alloy offering outstanding corrosion-resistance in a range of severe environments. Its high nickel (Ni) and molybdenum (Mo) provide good resistance in reducing conditions, and high chromium (Cr) offers resistance to oxidizing media. Molybdenum (Mo) and tungsten (W) aid resistance to localized corrosion such as pitting. Iron (Fe) is closely controlled to enhance properties. Low carbon (C) helps minimize grain boundary precipitation to maintain corrosion-resistance in the heat-affected zones of welded joints. Resistance to general, pitting and crevice corrosion increases with the alloying (Cr+Mo+W) content, and NiCrMo 686 scores higher than competitive materials.

Classification
AWS
A 5.14: ERNiCrMo-14
EN ISO
18274: S Ni 6686 (NiCr21Mo16W4)
F-nr
43
FM
6
W.Nr.
~2.4606
Suitable for

Duplex, super-duplex and super-austenitic stainless steels, nickel alloys such as UNS N06059 and N06022, INCONEL alloy C-276, and INCONEL alloys 622, C22, 625, and 686 CPT, Alloy 31, 1.4562, alloy 59, alloy C4, C2000, W86026

Welding positions
PA
PB
PC
PD
PE
PF
PG
Redrying
Not required
Gas acc. EN ISO 14175
I1
Analysis
C Si Mn P S Cr Ni Mo Nb Ti V Fe W Co Cu Al Nb+Ta
0.006 0.03 0.25 0.004 0.001 20 58 16 0.06 0.27 4 0.002 0.3
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 760 HRc
product sheet
Ask quotation
MSDS
NiCrMo 686 CPT Tig welding wire for inco-weld
NiCrMo 686 CPT Tig welding wire for inco-weld
Packing info
NiCrMo 686 CPT Tig 1,6 x 1000mm
Packaging KG/unit EanCode
Tube 4,54 8720663419415
NiCrMo 686 CPT Tig 2,0 x 1000mm
Packaging KG/unit EanCode
Tube 5 8720663419422
NiCrMo 686 CPT Tig 2,4 x1000mm
Packaging KG/unit EanCode
Tube 5 8720663419439
NiCrMo 686 CPT Tig 3,2 x 1000mm
Packaging KG/unit EanCode
Tube 4,54 8720663419446
product sheet
Ask quotation
MSDS