… of gray cast iron, also in combination with steel. In particular, however, for the welding of nodular cast iron. The alloy of the weld …

… with high strength due to the addition of copper. The filler metal shows remarkable bonding properties and fluididity during welding. … AL …

… superior strength at high temperatures. Therefore, this filler wire shows excellent resistance to high temperatures (most suitable …

… always necessary. If applied correctly the hardfacing layer wil not show any cracks. … 55-60 HRc hardfacing alloy against shocks and mineral …

… °C. CEWELD AA 4361 is primarily used in flat and horizontal positions. However, welds in other positions are also possible using short-arc or …

… designed to match the nickel base corrosion resistant alloy commonly known as alloy 59. The high level of Mo is similar to alloys C276 and …

… the primary water loops of nuclear power stations. The material also shows good resistance in mixtures of nitric and hydrofluoric acid. It …

… with excellent welding properties in difficult positions and shows high mechanical properties. It is particularly suited for cheap …

… plates should be preheated (150°C), prior to welding The alloy shows good corrosion-resistance and an excellent colour-uniformity after …

… as first layer in case off multi-layer welding. The weld metal will show no undercut !Preheating is normally done to slow down the cooling …