CEWELD NiCro 52

<

PRODUCT SPECIFICATIONS
PACKAGING

Type

Solid nickel base welding wire for Mig (GMAW) welding.

classification

AWS

A 5.14: ERNiCrFe-7

EN ISO

18274: S Ni 6052(NiCr30Fe9)

W.Nr.

2.4642

Applications

CEWELD Nicro 52 filler metal is used for welding nickel-chromium-iron (Inconel 690) alloys to themselves, and for dissimilar welding between nickel-chromium-iron alloys and steels or stainless steels. The applications include surfacing as well as clad-side welding. Interpass temperature of 150°C should be respected,

Type

Solid nickel base welding wire for Mig (GMAW) welding.

Applications

CEWELD Nicro 52 filler metal is used for welding nickel-chromium-iron (Inconel 690) alloys to themselves, and for dissimilar welding between nickel-chromium-iron alloys and steels or stainless steels. The applications include surfacing as well as clad-side welding. Interpass temperature of 150°C should be respected,

Properties

Excellent resistance against oxidizing media combined with high mechanical strength at room temperature but also at extreme high temperatures combined with high ductility due to the high chromium content. Alloy 690 was developed to offer greater resistance to stress corrosion in the nuclear industry, pure water environment..

Classification

AWS

A 5.14: ERNiCrFe-7

EN ISO

18274: S Ni 6052(NiCr30Fe9)

F-nr

43

FM

6

W.Nr.

2.4642

Suitable for

Inconel 690, VDM Alloy 690, Nicrofer 6030 N, FM 52, 2.4642, NiCr29Fe

Welding positions

Redrying

Not required

Gas acc. EN ISO 14175

I1

Analysis

C	Si	Mn	Cr	Ni	Mo	Nb	Ti	V	Fe	W	Co	Cu	Al	P	S	Nb+Ta
0.03	0.4	0.8	29.5	60	0.4	0.02	0.5		9

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
580°C±15°C 1h	260	580	30	200 HB
As Welded	770	870	16	HRc

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

NiCro 52 Mig welding wire

NiCro 52 Mig welding wire

Packing info

NiCro 52 1,14mm
Packaging	KG/unit	EanCode
BS-300	15	8720663418234

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.