https://pro.cdn.certilas.com/backoffice_media/17227/ERTi-2-Tig-welding-wire-for-titanium-grade-2.mp4

CEWELD ERTi-2 Tig
Is an equivalent for SELECTARC T40 TIG

SELECTARC T40 TIG

Brand

Ceweld product

Type

Titanium Tig welding wire grade 2

classification

AWS

A 5.16: ERTi-2

EN ISO

24034: S Ti 0120 / Ti99,6

Applications

CEWELD ERTi-2 is developed for welding Titanium grade 1, 2, 3 and 4. This alloy finds his applications in chemical industry and offers excellent Weldability.

Type

Titanium Tig welding wire grade 2

Applications

CEWELD ERTi-2 is developed for welding Titanium grade 1, 2, 3 and 4. This alloy finds his applications in chemical industry and offers excellent Weldability.

Properties

The weld deposit is ductile and offers excellent corrosion resistance in oxidizing environments. The unique combination of mechanical strength and corrosion resistance makes the alloy a preferred choice in many applications to prefent or solve problems. The wire is cleaned in a very special way to obtain porosity free and a ductile weld deposit.

Classification

AWS

A 5.16: ERTi-2

EN ISO

24034: S Ti 0120 / Ti99,6

F-nr

51

Suitable for

Titanium grade 1, 2, 3 and 4.

Welding positions

Redrying

Not required

Gas acc. EN ISO 14175

I1

Analysis

C	V	H	N	O	Fe	Al	Ni	Mo	Pd	Sn	Ti
0.02		0.005	0.01	0.1	0.1						Rem.

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded	275	395	20	HRc

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.