… porous slag (excellent for narrow gabs where the slag is often hard to remove). … Reh ≤ 420 MPa ISO 15608: 1.1, 1.2 1.0426, 1.0429, …

… Medium hard, wear resistant alloy with excelent lubricating and sliding …

… abrasion combined with impact. The deposit gives already a very good hardness in the second layer thanks to the Titanium carbides. The … is depending on the base metal and not always necessary.  … HRc 54-59, hardfacing alloy for Cement crusher rollers, Mineral and brick industry, Hammers, Screw …

… speziell für die rauen und robusten Umgebungsbedingungen in der Schweißindustrie entwickelt und gebaut. Sie umfasst die folgenden Merkmale: … Eigenschaften deckt den Bedarf der Rohrleitungs- und Behälterindustrie. Das System ist so konstruiert und gebaut, dass es rauen und …

… deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrees 20% at 600°C and has a nominal hardness of 49-53 HRc at room temperature. The weld deposit is high … due to its resistance to metal-to-metal wear.  … Stellite 12 alloy for hardfacing steam-valves, high temperature liquid pumps, hot cutting …

… Very good corrosion resistance and high hardness due to the amount of „cobalt“ even at higher temperatures. High hardness achieved in the first layer and often used as economical …

… gamma-prime-strengthened superalloys. CEWELD® Alloy 263 is an age-hardenable nickel-cobalt-chromium-molybdenum alloy designed specifically to combine good age-hardened strength properties with excellent fabrication characteristics …

… austenitic structure deposits. The deposit gives already a very good hardness in the first layer. A buffer layer with OA 4370 or OA MnCr is recommended in case of sensible base material or old hardface-layers. Weldable without protective gas. … Cement industry, pumps, mixer blades, earthmoving equipment, dredging …

… abrasion resistance combined with heavy shocks, despite the high hardness several layers can be applied without any risk of braking out … of sensitive base material preheating is recommended at 300-400°C. Old Hardfacing layers should be removed, clean or grind properly before …

… comparable analysis. Attractive bead appearance without slag residues. Hard facing alloy with excellent thermo shock resistance and increased hardness due to additions of Vanadium and Niobium. Best to be used …