… be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is usualy already achieved …

… against sliding wear of metallic objects.It has a good retention of hardness up to 650°C and is non scaling up to 900° C thermo shock resistant and resistant to sudden changes of temperature.Work hardening. Not crack sensible.The number of layers can be done as …

… deposit can be machined  with tungsten tool tips and by grinding. The hardness of the deposit will degrease 16% at 300°C and about 30% at … over a wide temperature range, and retains a reasonable level of hardness up to 500°C (930°F). … Examples include valve seats and gates; …

… be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved already in the …

… maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved in the first … we advise to buffer with one layer CEWELD® AA B460. … 55-62 HRc hardfacing alloy against heavy impact and shock, bucket, loaders, …

… HVOF-sprayed, very dense coatings can be achieved with extreme hardness of 800-1300 HV0.3 and adhesion strength of more than 70 MPa. … 5.2-5.8 g/cm³ Particle shape: preponderantly spherical Coating microhardness: 800-1300 HV0.3 Sales units: Particle size* (DIN EN 1274 3.3): … piston rods, corrugating rolles, hydroturbine buckes, hardchrome replacement. … Powder 86104-CoCr-45 … 14232-1 WC-Co-Cr 86/10/4 …

… deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrees 20% at 600°C and has a nominal hardness of 49-53 HRc at room temperature. The weld deposit is high … due to its resistance to metal-to-metal wear.  … Stellite 12 alloy for hardfacing steam-valves, high temperature liquid pumps, hot cutting …

… Very good corrosion resistance and high hardness due to the amount of „cobalt“ even at higher temperatures. High hardness achieved in the first layer and often used as economical …

… austenitic structure deposits. The deposit gives already a very good hardness in the first layer. A buffer layer with OA 4370 or OA MnCr is recommended in case of sensible base material or old hardface-layers. Weldable without protective gas. … Cement industry, pumps, mixer blades, earthmoving equipment, dredging …

… gamma-prime-strengthened superalloys. CEWELD® Alloy 263 is an age-hardenable nickel-cobalt-chromium-molybdenum alloy designed specifically to combine good age-hardened strength properties with excellent fabrication characteristics …