1. … up to 450°C and offers scaling resistance up to 950°C. Preheating at 250 °C and stress relieving at 800 °C is recommended if this is …
  2. … Mn steel). The weld deposit is offers strain hardening properties from 250 till 450 HB … austenitic manganese steel, high impact loads, …
  3. … 52 HRc Tempered 450° C ~ 49 HRc Tempered 350° C ~ 48 HRc Soft annealed 250 HB … 45-52 HRc  1.2567, 1.2365, 1.2713, 1.2714, 1.2581 30WCrV17 2, …
  4. … subject to heavy abrasion. The interpass temperature should be maximum 250ºC. The spray deposit is machinable by special carbide tools. … …
  5. … to heavy impact and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening …
  6. … to heavy impact and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening …
  7. … be kept low (as for Mn steel, interpass temperature should be kept < 250 °C). … Rebuilding and joining cold straining Mn steels or …
  8. … to heavy impact and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable by special carbide tools, hardening …
  9. … Preheating and interpass temperature 400-450 °C (austenitic welding) or 250-300 °C (martensitic welding). Root passes should principally be …
  10. … subject to heavy abrasion. The interpass temperature should be maximum 250ºC. The spray deposit is machinable by special carbide tools.  … …