1. … with niobium and titanium gives it the advantages of both these ferritic structure stabilizers: Titanium minimizes grain growth in Weld Metal zones (WM) due to titanium nitride (TiN) precipitation in the still liquid metal in these zones, thus avoiding …
  2. … Excellent weldabillity and good mechanical strength combined with good … alloys and covers a huge range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg4,5Mn, … 3.3211, 3.4335, EN AW 5086, EN AW 5083, EN AW 5019, EN AW 5019, EN AW 6060, EN AW 6005A, EN AW 6082, EN AW 6061, EN AW 7020, EN AC 51300, EN …
  3. … Seamless flux-cored wires represent a remarkable innovation in the field of welding, particularly within the shipbuilding sector. These wires bring a host of …
  4. … CEWELD E NiFe 60/40 K has a few benefits compare to other “FeNi” types … current, copper coated core wire and a powerful arc at very low amps. Preheating is normally done to slow down the cooling speed, in case you … EN-GJS-400-15, EN-GJS-400-18, EN-GJS-450-10, EN-GJS-500-7, EN-GJS-600-3, EN-GJS-700-2. GGG40, GGG45, GGG50, GGG60; GGG70, GGG80 … E NiFe …
  5. … CEWELD® AlSi12 Tig was originally developed as a brazing alloy to take … point and narrow freezing range. In addition, it has a higher silicon content than AlSi5, which provides increased fluidity and reduced … elevated temperatures. Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 …
  6. Brand: ITW Elga - Hobart
    CEWELD Product: AA R500, AA R500SR
    … Megafil wires are seamless and therfore they offer a lower hyrogen content (≈2 ml/100gr) even after many years of storage. Due to less preheating required huge savings can be made and these type of wires offer better feeding properrties …
  7. … The corrosion resistant deposit with a medium hardness is resistant against impact wear as well as permanent stress by heat influence, metal wear and high surface pressure  … 1.4317, 1.4313, 1.4407, 1.4414,    GX4CrNi13-4, …
  8. … NiCrMo 686 (UNS N06686/W.Nr. 2.4606) is a single-phase, austenitic … to enhance properties. Low carbon (C) helps minimize grain boundary precipitation to maintain corrosion-resistance in the heat-affected … and super-austenitic stainless steels, nickel alloys such as UNS N06059 and N06022, INCONEL alloy C-276, and INCONEL alloys 622, C22, 625, …
  9. … CEWELD® E DUR 350 Kb is a Hardfacing electrode against high impact combined with abrasion. This alloy … appearance and outstanding welding properties on both AC and DC+. Preheating is not required. Outstanding slag release. … Rebuilding worn …
  10. … Alloy 740H Tig is a nickel-base, precipitation hardenable superalloy that offers a unique combination of high strength and creep resistance at elevated …