… production process the hydrogen content is below 3ml/100g weld metal even after long storage in unconditioned condition. … Type …

… The filler metal has low levels of tramp elements (eg. Sn, As, Sb and P) providing …

… tensile strenght and a high resistence against sliding wear of metallic objects.It has a good retention of hardness up to 650°C and is …

… Due to the high resistance to cracking and toughness, all spray metal requires no buffer layer except on materials considered critical. …

… first layer. The choice for the buffer layer is depending on the base metal and not always necessary.  … 55-57 HRc hardfacing alloy against …

… Austenitic filler metal for stabilized and non-stabilized CrNi steels. Heat resistant up …

… with corresponding flux.  Suitable fluxes are depending on the weld metal requirements, in most cases CEWELD® FL 155 gives excellent …

… better wetting properties compared to solid wires. Excellent weld metal quality and X-ray soundness and excellent slag removal. … 19%Cr, …

… Filler metal with good flowing properties and capillarity.  Colour very …

… resistance over an ER409 alloy. Single pass welds on light gage base metal or welds with preheat do not usually require PWHT. … 1.4000, …