… Filler metal specifically intended for high integrity structural service at elevated temperature so …

… minimize the heat input, because materials of this composition have a tendency to embrittle in the temperature range of approx. 600-800° C. …

… long term creep properties. These consumables are specifically intended for high integrity structural service at elevated temperature so …

… weld cracking and produces bright, almost smut-free welds. Not recommended for anodizing. Non-heat treatable. Thicker sections should be …

… the base metal creep properties. These consumables are specifically intended for high integrity structural service at elevated temperature so …

… Carbide size: 2,5 μm FSSS Density (ISO3923-2): 4.2-5.5 g/cm³ (dependent on designated size) Particle shape: preponderantly spherical …

… This results in lower hardness and strength values, which reduces the tendency to crack, especially if the weld seams are not …

… considered critical. In this Situation Ceweld SP NiAl is recommended. Suited for wear parts subject to heavy abrasion. The interpass …

… soudée n'est pas le cordon de soudure ; le cordon moyen ne prend qu'environ 15% du temps de travail réel. 85 % du temps nécessaire …

… influances. SA Corten wire can be used with FL188 (or an other type depending on the requirements and application). … CuNi, Reh ≤ 460MPa ISo …