… 2400 HV Iron and Tungsten based hardfacing alloy containing 52-58% (depending on wire … Multi-layer deposits are not recommended due to the extreme high hardness. Fused tungsten carbide will guaranty a long life for several … mixer plates in the brick and clay industry and on decanter screws or hardfacing deep drilling equipment. … OA WC2 Fe … 14700: T Fe20 …

… Austenitic deposit with strain hardening properties and no limits in the number of layers. The deposit … The weld deposit offers fair corrosion resistance and has strain hardening properties. This alloy should be applied at highest impact … crushing hammers, dredger teeth, rollers, blast furnace, mantles, Hardfacing manganese hard stee, buffer layers etc.. … SACW MnCr … …

… metal to metal wear resistance combined with impact, despite the high hardness several layers can be applied without risk of chipping of. The weld deposit is temperature resistant up to 500°C and hardness will remain very well at increased temperatures. Scale …

… very good corrosion resistance, shiny coating with a little higher hardness than SP 1.4115. The spray deposit cannot be machined with normal cutting tools, grinding is possible. Hardness approximately 50 HRc … Flame spray, electric spray and high …

… be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is usually already achieved … rollers, bucket and loader teeth, crusher jaws, buffer layers prior to hard facing. … OA 400 … 14700: T ZFe1 …

… deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrees 20% at 600 °C and has a nominal hardness of 49-53 HRc at room temperature. The weld deposit is high … and abrasion resistance, Thermo shock resistant and impact resistant, Hardfacing valves, Seats, Pumps, Knives, Plastic recycling …

… Hardfacing alloy for cladding steel mill rollers, thermoshock resistant … for cladding. The corrosion resistant deposit offers a medium hardness and is resistant against metal-metal wear and high surface …

… deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degreas 20% at 600°C and has a nominal hardness of 47-52 HRc at room temperature. The weld deposit is high … for hardfacing of engine valves, pinch rollers in the metal-processing industries, and rotor blade edges. … Powder PTA DUR 12 …

… maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved in the first …

… abrasion combined with impact. The deposit gives already a very good hardness in the first layer thank to the Nb carbides. The choice for … on the base metal and not always necessary. If applied correctly the hardfacing layer wil not show any cracks. … 55-60 HRc hardfacing alloy against shocks and mineral wear, Cement rollers and crushers, Drilling shafts, Mineral and brick …