2209 Duplex

type 
Solid Mag welding wire for welding Duplex stainless steels.
applications 
Used for pipe work and general fabrication in the offshore oil and gas and chemical process industries. Also suitable for cladding steels to obtain corrosion resistant layers.
Properties 

A continuous, solid, corrosion-resistant, duplex wire for welding austenitic-ferritic stainless alloys of the 22% Cr, 5% Ni, 3% Mo types. 2209 has high general corrosion resistance. In media containing chloride and hydrogen sulphide, the alloy has a high resistance to intergranular corrosion, pitting and especially to stress corrosion. The alloy is used in a variety of applications across all industrial segments.

classification
AWS 
A 5.9: ER 2209
EN ISO 
14343-A: G 22 9 3 N L
DIN: W.Nr. 
1.4462
DIN 
8556: SG X2CrNiMo 22 9 3
Suitable for 

Welding wrought, forged or cast duplex stainless steels in the as welded condition. Also suitable for dissimilar welding of low alloyed steels and common stainless steels, UNS S31803, S32205, UR 45N & UR 45N+, 2101, 2205, SAF 2205 Fafer 4462, NKCr22, SM22Cr, Falc 223 UNS S32304 : UR 35 N SAF 2304
W.Nr:  1.4162, 1.4462, X2CrNiMoN 22 5 3, 1.4362, X2CrNiN 23 4,  1.4463, 1.4460, 1.4583

approvals 
TUV (12397.00), CE approved.
welding positions: 
Typical all weld analysis

C

Mn

Si

Cr

Ni

Mo

N

0,025

1,60

0,5

23.0

9.0

3.0

0,14

mechanical properties

Heat treatment

RP0,2

Rm

A5

Impact energy (J) ISO-V

Hardness

(N/mm2)

(N/mm2)

(%)

+20C

-40°C

-60C

HRc / HV

AW

>560

>730

26

>80

>37

AW: as welded
redrying temperature 
not required
welding parameters / packing

Welding Parameters

Packing

D (mm)

Voltage (V)

Current (A) DC+

spool type

spool weight (kg)

pallet weight (kg)

0,8

16-22

50-140

D-200 / K-300 / POP

5 / 15 / 250

1200 / 1080 / 1000

1,0

16-24

80-190

D-200 / K-300 / POP

5 / 15 / 250

1200 / 1080 / 1000

1,2

20-28

180-280

D-200 / K-300 / POP

5 / 15 / 250

1200 / 1080 / 1000

gas acc. en iso 14175:
M12, M13

Disclaimer: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.