1000 S

type 
Universal rutile electrode for all positions
applications 
Trucks, trailers, wagons, shipbuilding, yacht building, root runs in pipe welding, repair welding etc.
Properties 

1000 S is a medium thick coated electrode suitable for general construction and offers a very smooth seam surface. 1000 S is suitable for all positions; 2,5 mm can even be used in vertical down position. Medium fast freezing weld metal makes this electrode excellently suitable for root runs in vertical up position in pipe welding. The slag is self detaching and the special blue coating was developed to offer high resistance against moisture pick up.

classification
AWS 
A 5.1: E 6013
EN ISO 
2560-A: E 42 0 RC 11
DIN 
1913: E 51 32 RR(C)5
Suitable for 
DIN:
Unalloyed steels:
Boiler plates:
Pipe steels:
-
Shipbilding plates:
Steel castings:
Thin sheets:

-
St 33 to St 52.3
HI, HII, 17 Mn4
St 35 to St 52.4
StE 210.7 to StE 360.7
A, B, D
GS-38 to GS-52
1623/1

W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0308 to 1.0581
1.0307 to 1.0582
1.0440, 1.0472, 1.0475
1.0416 to 1.0551

 

approvals 
TUV, DB, GL, CE approved
welding positions: 
All weld metal analysis

C

Mn

Si

Cr

Ni

Mo

0,08

0,65

0,45

mechanical properties

Heat

RP0,2

Rm

A5

Impact Energy (J) ISO-V

Hardness

Treatment

(N/mm2)

(N/mm2)

(%)

0°C

-40°C

-60°C

HRc / HV

AW

>420

510-610

>22

>47

AW: as welded
redrying temperature 
140ºC / 1hr
welding parameters packing

Welding Parameters

Packing

D (mm)

Length (mm)

Current (A)

kg / can

kg / 6pack

kg / 1000

2,5

350

60-85

2.6

15.6

3,2

350

90-135

2.6

15.6

4,0

350

130-170

2.6

15.6

5,0

350

175-220

2.6

15.6

note
on request also available in 1,6 and 2,0 mm

Disclaimer: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.